Vcds 11.11.4

Vcds 11.11.4 Download

(, 03:07 PM)waool Wrote: SO how can I program the firmware and use the loader? Just normal flashing with software or needs other things??Mateyou must program Atmega162 with an external programmerAfter that you need to program FTDI over USB with MprogFor RL cable you must program GAL/ATF - I assume that you have a RL cable because you asked loaderand for RL cable you need to do some modifications to the PCBthen install VCDS 11.11.0 and copy loader to installation folderMake a shortcut to your desktop (loader)every time you want to use VCDS - click the shortcut on the desktopGood luck.

Vcds 11.11.4

CAUTION:There's several versions of VAG-COM sold online. Unfortunately 99% of them are using low-grade hardware chip with additional of cracked VCDS software ( sometimes needed an awkward computer date adjustment). If you own this kind of version, know half of it's functions don't work. For that reason we recommend you get the high-quality cable with original, unlocked and full version of VCDS software from Ross-Tech™ — by clicking.STEP 1: Install Ross-Tech VCDS SoftwareDO NOT plug VAG-COM cable into computer yet.Uninstall any other VCDS versions, if present on computer. Then delete c:Ross-Tech folder.Install VCDS software.

Make sure to tick ON 'Install 32-bit'. (If option is grayed out, don't worry, continue.)Leave original installation path of: C:Ross-TechVCDSWhen install is complete, do not launch VCDS.Exit the Installer.STEP 2: Plug VAG-COM Cable Into ComputerPlug VAGCOM cable into any USB port.Windows will install drivers automatically.If driver install fails, skip to.

STEP 3: Disable Internet & Launch VCDS SoftwareGolden Rule: Disconnect from WIFI before launching VCDS software.Read golden rule above? If yes, then.Launch VCDS software from Start Menu. Or from C:Ross-TechVCDSVCDS.exeGo to: Options » Test (leave it as USB)It should show ' Port Status: OK':Click 'Save'.STEP 4: Enable licenseOn main screen, click on button:Make sure it says:If it shows instead: Invalid/Unauthorized, then do again:Go to: Options » TestIt should show 'Port Status: OK' Save You're now ready to scan your car!Troubleshooting:You are here because when you inserted VAG-COM cable for first time, Windows failed to install drivers properly. SOLUTION 1:Leave cable connected to computer. Restart computer.

Vcds 11.11 4 Download

It should be fixed now. Go to.SOLUTION 2:VAGCOM cable should be connected to computer.1) Go to Control Panel. Windows Vista/7/8/10: Control Panel » System » Device Manager.

Windows XP: Control Panel » System » 'Hardware' tab » Device Manager2) Expand 'Ports (COM & LPT)' or 'Universal Serial Bus Controllers'.You're looking for a device that has name 'Ross-Tech' in it. It will have a yellow mark next to it like this:Here's an example: OR it may show as 'Ross-Tech Direct USB Interface'.3) Right-click on this device with the yellow mark » Update Driver Software.4) Choose ' Browse Computer for Driver Software'.5) Browse to: ' C:Ross-TechVCDS'.

It should look like this:6) Click 'Next'. When you get below message, choose ' Install this driver software anyway'.When driver installation is complete, disconnect cable from computer. Restart computer.When you're back in Windows, you may connect cable into computer, and go to.SOLUTION 3:If after SOLUTION 2, cable is still showing a Yellow mark ( ), then you're likely on Windows 8, 8.1, 10 or above.In this case, disconnect cable.And disable driver signature enforcement. Here's how: When done, go to.Notes:. DO NOT update the software to latest version, else it will not work. Only works on current version. If you bought your VAG-COM cable from us, then registration is not needed.

It's already registered/licensed.